Axial Flow Fans
A axial flow fan range for low and medium pressure suitable for comfort air engineering, cooling, agriculture, and gardening centres.
Axial Flow Fans AFR
AFR: Simple axial flow fan with wire frame made of galvanized sheet steel and coated.
Impeller mounted on the rotor of the external rotor motor.
- Impeller diameters from 250 up to 400 mm
- Flow rate up to 2,800 m³/h
- Pressure up to 65 Pa
> Get the documentation here ...
Axial Flow Fans AFQ, AFK and AFM
AFQ: with mounting plate , wire frame and manufactured inlet cone
AFK: with wire frame
AFM: axial rotor motor unit
Casing made of galvanized sheet steel and coated.
Impeller with adjustable blades made of coated aluminium magnesium alloy mounted on the rotor of the external rotor motor.
- Impeller diameters from 315 up to 630 mm
- Flow rate up to 14,000 m³/h
- Pressure up to 140 Pa
> Get the documentation here ...
Axial Flow Fans AQA
AQA 61: Square wall mounting plate incorporating an inlet ring of galvanized sheet steel and painted. (light grey) Plastic impeller bolted to the rotor of the integral motor, Connecting cable and terminal box supplied loose inlet guard fitted conforming to DIN EN 294.
Low noise, maintenance free, ready to connect.
Application: General ventilation, cooling industry, agriculture and gardening centres.
- Volume flow up to 17,000 m³/h.
> Get the documentation here ...
> Start fan selection via proSELECTA II
Axial Flow Fans AWA
AWA 11: Wall mounting ring incorporating an inlet cone of painted sheet steel.
Impeller made from galvanized sheet steel shrink-fitted onto the rotor of the integral motor, connection cable supplied loose inlet guard fitted conforming to DIN EN 294.
Low noise, maintenance free, ready to connect.
Application: General ventilation, cooling industry, agriculture and gardening centres.
- Volume flow up to 2,500 m³/h.
AWA 61: Wall mounting ring incorporating an inlet cone of galvanized sheet steel and painted. (light grey) Plastic impeller bolted to the rotor of the integral motor, connecting cable and terminal box supplied loose inlet guard fitted conforming to DIN EN 294.
Low noise, maintenance free, ready to connect.
Application: General ventilation, cooling industry, agriculture and gardening centres.
- Volume flow up to 17,000 m³/h.
> Get the documentation here ...
> Start fan selection via proSELECTA II
Axial Flow Fans ARA
ARA 61: Duct mounted casing with connecting flanges on both sides, made from sheet steel and powder coated plastic impeller bolted to the rotor of the integral motor, low noise, maintenance free, ready for connection with terminal box fitted on fan casing.
Application: General ventilation, cooling industry, agriculture and gardening centres.
- Volume flow up to 17,000 m³/h.
ARA 62: Duct mounted for flush mounting in long casing design, made from sheet steel and powder coated plastic impeller bolted to the rotor of the integral motor, low noise, maintenance free, ready for connection with terminal box fitted on fan casing.
Application: General ventilation, cooling industry, agriculture and gardening centres.
- Volume flow up to 17,000 m³/h.
> Get the documentation here ...
> Start fan selection via proSELECTA II
Axial Flow Fans ATA
ATA 61: Technical design as for AWA and AQA but without wall ring, suitable to be integrated into units. Self supporting inlet guard fitted conforming to DIN EN 294.
Low noise, maintenance free, ready to connect.
Application: General ventilation, cooling industry, agriculture and gardening centres.
- Volume flow up to 17,000 m³/h.
> Get the documentation here ...
> Start fan selection via proSELECTA II
