Fans for the Asia Pacific Rim Market

Nicotra Gebhardt offers for the Asia Pacific Rim markets a range of axial fans.
These fans include duct axial fans with long case (ADT, ADTA), short case (ADS) and short case with integral inlet cone at suction side (ADM), with the impeller directly mounted on the shaft of the drive motor, placed in the airstream.
Axial fans with long case, belt drive and motor installed outside the airstream (ABE) are also available.
All fan models use IEC standard motors and impellers with either aluminium or reinforced plastic blades.

Axial Flow - Duct Casing Fans
Series ADT, ADTA, ADS, ADM and ABE

ADT

The axial flow fans are manufactured in several duct casing styles made of galvanized sheet steel.
The axial impeller is made of aluminium casting or reinforced plastic blades and directly mounted on the shaft of an IEC standard motor placed in the airstream.

ADT/ADTA: Long duct casing, both sides with mounting flange
ADS: Short duct casing, both sides with mounting flange
ADM: Short duct casing, suction side with inlet cone and discharge side with mounting flange.

Impeller diameters from 315 up to 1400 mm
Flow rate up to 180,000 m?/h
Pressure up to 1,600 Pa
Power up to 55 kW

> Get more information here ...

Cabinet Fans CD, CPN and CKN

Particularly for the Asia Pacific Rim markets, Nicotra Gebhardt offers a range of cabinet fans, consisting of an external enclosure, containing either a direct driven fan from the DD range (CD cabinets), or a belt driven fan from the ADH or RDH ranges (CPN and CKN cabinets), connected with the discharge opening.
The external structure may be suitable for indoor installation (CD cabinets) or outdoor, and is conceived to be connected either to a rain-proof louver or to a duct, on both the inlet and outlet sides.